Type RH Rotorseals
The rotating seal is established by a non-metallic sealing ring,held against the rotorseal shaft by a light spring force. The sealing ring is designed so that media pressure acts on both of its ends to minimize the force on the sealing surface.This design gives positive protection against leakage and compensates for seal wear. Ball bearings are used between the stationary and rotating ports to provide rigidity to the rotorseal assembly and to minimize the running torque.
- Brand:Rubflex
- Size:3/4RH,1RH,1-1/4RH,1-1/2RH,2RH
- Replacement:Airflex,Fawick,Oil States,Dellner
| 3/4RH | 1RH | 1-1/4RH | 1-1/2RH |
| 2RH |
- Maximum Pressure: Standard models handle up to 150 psi (10.4 bar), while high-pressure designs reach up to 1,000 psi (69 bar)
- Maximum Speed: Operational speed limits range from 600 to 4,000 rpm depending on the series and media.
- Materials: Typically built with aluminum housings, ball bearings, and carbon seals.
Would you like to start a project with us?
Please provide as much detail as possible regarding your requirements; based on the information provided, we will arrange for the appropriate sales and technical personnel to contact you.